Schechtl MAX 310/CNC
Model MAX is a motor driven bending machine with a capacity of max. 1,5 mm (related to 3100 mm working length). Model MAX stands for power, speed, operating comfort and flexibility. The speed of the bending beam with 80°/sec and the opening of the upper beam with 50 mm/sec are impressing. The upper beam opens while the bending beam moves down so the part can to be positioned for the next step simultaneously. The combination of the SCHECHTL CNC Touch Control, the motor-operated back gauge and the movable foot switch provides a bending system for "one-man-operation" even for sheets up to 3100 mm.
The work sheet is led through upper- and under beam and clamped perpendicular with the controlled closing of the upper beam. So the piece doesn't slide forwards being clamped and the accuracy is preserved. The upper beam clamping pressure can be adjusted on each side of the machine separately. The upper beam can be opened to approx. 140 mm.
Model MAX comes standard with a sharp rail 20° and a profile rail 20°, R = 2 mm for the upper beam and one of each insert rail 68/10 and 68/24 for the bending beam. All bending rails are exchangeable. The bending beam may be adjusted to different sheet thicknesses and radius' within seconds.
- motor operated back gauge inclusive 12 safety stop fingers
- easy adjustment of bending beam and upper beam
- mainly mechanical parts
- bearings and guideways are maintenancefree
- movable foot switch
- eccentric driven upper beam
- upper beam, lower beam and bending beam in welded steel design
- Moeller control elements, SEW motors
- CNC-Touch-Control with frequency inverter